SMC Networks SMC2586W-G manual Sending the Active Device List to Others by E-mail

Sending the Active Device List to Others by E-mail

The active device list can be sent to others by e-mail. Click Send on the File menu to do this.

Appendix A: Default Settings

TIP: Press the Default button on the powered-on SMC2586W-G to reset the configuration settings to factory-default values.

Appendix B: Troubleshooting

Check the following first:

•Make sure that the power of the SMC2586W-G is on and the Ethernet cables are con-nected firmly to the RJ-45 jacks of the SMC2586W-G.

•Make sure that the LED ALV of the SMC2586W-G is blinking to indicate the SMC2586W-G is working.

•Make sure the types of the Ethernet cables are correct. Recall that there are two types—straight-through and crossover.

Wireless Settings Problems

•The wireless client computer cannot associate with an SMC2586W-G.

•Is the wireless client set in infrastructure mode?

•Check the operating mode of the WLAN NIC.

•Is the SSID of the WLAN NIC identical to that of the prospective SMC2586W-G?

•Check the SSID setting of the WLAN NIC and of the SMC2586W-G.

• Is the WEP functionality of the prospective SMC2586W-G enabled?

85