SMC Networks SMC2586W-G manual Tutorial

•Configuring by Web browser. Launching the default Web browser to manage the selected device.

•Batch processing. Applying a network management command to multiple devices at a time. The following commands are supported:

•Check Alive. Checking whether the selected devices are operating.

•Change SSID. Changing the SSID setting of every selected device.

•Upgrade Firmware by TFTP and HTTP. Upgrading device firmware.

•Back up Configuration by TFTP and HTTP. Retrieving device configuration files from devices and save them to the local hard disk.

•Restore Configuration by TFTP and HTTP. Restoring saved device con-figuration files to devices.

•Event Logging. The result of each network management command is shown in a log window, and it can be optionally saved to the hard disk for later reference.

NOTE: EliteConnect Management Utility fully supports SMC2582W-B and SMC2586W-G Wireless Bridges while “Check Alive” function is only supported in SMC2682W.

4.2. Tutorial

Before getting started with this tutorial, you have to install EliteConnect Management Utility by running the setup program on a PC and prepare an SMC2582W-B EliteConnect 802.11b Wireless Bridge or SMC2586W-G EliteConnect 802.11g Wireless Bridge.

51