![](/images/new-backgrounds/1187011/18701195x1.webp)
SNMP
Fig. 59 SNMP settings.
The SNMP (Simple Network Management Protocol) functionality can be dis- abled, and you can specify the name (used as a password) of the read-only and read-write community. In addition, up to 5 SNMP trap targets can be set in the SNMP Trap Table.
To specify a trap target:
1.Type the IP address of the target host.
2.Type the Community for the host.
3.Select the corresponding check box next to the IP address text box.
4.EliteConnect Management Utility
48