Maintenance and care
Replacing the "Active Air Clean" filter and the "Active HEPA" filter
Open the dust compartment lid.
Do not use more than one filter at a time.
Lift and remove the filter.
Insert a new filter and press it downwards.
If you wish to replace the Active Air Clean filter or the Active Hepa filter with an Air Clean filter see "Maintenance and care - Exchanging exhaust filters".
Close the dust compartment lid firmly until it clicks into place.
Resetting the filter change indicator
The filter change indicator (Reset button) must be reset each time the filter is replaced. To do this, the vacuum cleaner must be plugged in.
Press and hold the filter change indicator light until it goes out.
The display is now reset.
The indicator is only reset if pressed while lit. If the indicator is pressed while not lit, it will not be reset.
28
