JVC FS-H35 Tuning in to a Preset Station, Tune in to the station you want to preset, Press SET

To preset stations manually—Manual presetting

You need to preset stations separately for the FM and

To tune in to a preset station directly using the number buttons

AM bands.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start over from step 2.

On the remote control ONLY:

1Tune in to the station you want to preset.

• See “Tuning in to a Station” on page 12.

2 Press SET. SET

On the remote control ONLY:

Pressing the number button(s) allows you to select the preset number you want.

Ex.: For preset number 5, press 5. For preset number 15, press

+10, then 5.

For preset number 20, press +10, then 10.

For preset number 30, press +10, +10, then 10.

1 2 3

4 5 6

7 8 9

1010

3Press UP or DOWN to select a preset number.

4Press SET again.

UP

DOWN

The tuned station in step 1 is stored in the preset number selected in step 3.

•Storing a new station on a used number erases the previously stored one.

When you unplug the power cord or if a power failure occurs

The tuner preset stations will be erased in a few days. If this happens, preset the stations again.

Tuning in to a Preset Station

On the remote control ONLY:

1Press TUNER to select the band.

TUNER

The unit automatically turns on and tunes in to the previously received station—either FM or AM.

•Each time you press the button, the band alternates between FM and AM.

2Press UP or DOWN to select a preset number.

UP

DOWN

13