Basic Disc Operations
While playing a disc, you can do the following operations.
To stop playing for a moment
During play, press 3/8 CD. | CD |
While pausing, the elapsed playing time |
|
flashes on the display. |
|
To resume playing, press 3/8 CD again.
To go to another track
Before or during play, press ¢ or
4repeatedly.
•¢ : Skips to the beginning of the next or succeeding tracks.
•4 : Goes back to the beginning of the current or previous tracks.
To go to another track directly using the number buttons
Programming the Playing Order of the
You can arrange the order in which tracks play before
you start playing. You can program up to 20 tracks.
On the remote control ONLY:
1Load a disc.
•If the current playing source is not the CD player, press 3/8 CD, then 7 before going to the next step.
2 Press PRGM (program). | PRGM |
The PROGRAM indicator lights up on the display.
PROGRAM
•If a program has been stored in memory, the program is called up.
On the remote control ONLY:
Pressing the number button(s) before or during play allows you to start playing the track number you want.
Ex.: For track number 5, press 5. For track number 15, press
+10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
1 2 3
4 5 6
7 8 9
10
10
3 Press UP or | DOWN | UP |
to select the track number, |
| |
then press SET. |
| DOWN |
•You can select the track number directly using the number button(s). (See “To go to another
track directly using the number | SET | |
| ||
buttons.”) |
|
|
Track number | Program step number | |
To locate a particular point in a track
During play, press and hold ¢ or
4.
•¢ :
•4 :
4Repeat step 3 to program other tracks you want.
5 Press 3/8 CD. | CD |
The tracks are played in the order you |
|
have programed. |
|
If you try to program a 21st track
“FULL” will appear on the display. |
| ||
|
| ||
|
|
|
|
To stop playing, press 7. |
| ||
To exit from Program Play, press | PRGM | ||
PRGM (program) before or after playing. |
| ||
• The PROGRAM indicator goes off. |
| ||
15
