Kyocera 3035, 5035, 4035 Registration keys ON/OFF, Key Inch specifications, DisplayRegisterkey

Section 7 COPIER MANAGEMENT FUNCTIONS

●Registration keys ON/OFF

Perform the following procedure to set whether or not to allow a “Register” key to be displayed in the screen for those function and modes which can be registered under the registration keys. Functions and/or modes can only be registered under registration keys through the “Register” key.

1Display the “Copy default” screen.

(See “(5) Accessing the copy default settings” on page 7-62.) Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Display register key” [“Display "Register" key”] in the settings list on the left side of the touch panel and then touch

the “Change #” key.

The “Display register key” [“Display "Register" key”] screen will be displayed.

Inch specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode	Up
Preset limit	999 Set
Modify Copy	On / Default Off	Down
Display register key	On
Customize(Main function)
Customize(Add function)		Change #
Default setting

Metric specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode	Up
Preset limit	999 Set
Modify copy	On / Default Off	Down
Display"Register"key	On
Customize(Main function)
Customize(Add function)		Change #
Default setting

3If you want the “Register” key to be displayed, touch the “On” key. If you do NOT want it to be displayed, touch the “Off”

key.

Inch specifications

Display register key Back Close

Select One touch key On/Off.

Able to use Register key on each screen .

On

Off

Default setting - Copy default

Metric specifications

Display"Register"key Back Close

Select to show Register key On/Off.

Able to use Register key to register/delete at each page.

On

Off

Default setting - Copy default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-84