Kyocera 4035 When paper misfeeds, Removal procedures, Paper misfeed, Open the drawercassette

Section 9 TROUBLESHOOTING

3. When paper misfeeds

If a paper misfeed occurs, a message will be displayed in the touch panel about the misfeed and copying will stop. Leave the power switch ON ( ) and refer to “(2) Removal procedures” to remove the jammed paper.

Inch specification		Metric specification
Paper misfeed. Careful for Drum.		Paper misfeed. Careful for Drum.
1. Open left cover1.		1. Open left cover1.
		2. Remove paper.
2. Remove paper.
		3. Close cover.
3. Close cover.
	JAM 30	JAM 30

(1) Cautions

WARNING

High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock.

CAUTION

The copier’s fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned.

•Do not reuse misfed paper.

•If paper is torn during removal, be sure to remove all loose scraps from inside the copier, or they could cause misfeed later.

•After misfed paper has been removed, warm-up will begin. The Misfeed indicator will turn off and the copier will return to the same settings prior to the misfeed.

(2) Removal procedures

1Misfeed in paper feed section

¥ Misfeed in drawer[cassette] (JAM 10 to 13, 15 to 17)

If the message below appears, a misfeed has occurred in the drawer[cassette] (or optional Paper Feeder). Remove the misfed paper using the procedure given below.

Inch specifications

Paper misfeed.

1.Open cassette1.

2.Remove paper.

3.Set cassette.

JAM 10

Metric specifications

Paper misfeed.

1.Open cassette1.

2.Remove paper.

3.Set cassette.

JAM 10

1Open the drawer[cassette].

9-4