Kyocera 5035, 4035, 3035 Cleaning the copier, Cleaning the original cover, Cleaning the platen

Section 10 MAINTENANCE AND OPERATION

INFORMATION

1. Cleaning the copier

CAUTION

For safety purposes, ALWAYS remove the power plug from the outlet when performing cleaning operations.

●Cleaning the original cover

Lift open the original cover. Wipe the back side of the original cover with a soft cloth dampened with alcohol or a mild detergent.

* Never use thinner or other organic solvents for this purpose.

NOTE

When the slit glass becomes dirty, “Clean the slit glass for original fed from DP.” [“Clean the slit glass for original fed.”] may appear. In this case, perform the cleaning operation on the slit glass and then touch the “End” key.

Inch specifications

Clean the slit glass for original fed from DP.

Open the document processor. Clean the surface of narrower glass located at left with a dry cloth.

Please close the document processor. Press END key

If the slit glass is dirty, black line

will appear on the copy.

End

Metric specifications

Clean the slit glass for original fed.

Open the document processor. Clean the surface of narrower glass located at left with a dry cloth.

Please close the document processor. Press END key

If the slit glass is dirty, black line

will appear on the copy.

End

●Cleaning the platen

Lift open the original cover. Wipe the platen with a soft cloth dampened with alcohol or a mild detergent.

* Never use thinner or other organic solvents for this purpose.

●Cleaning the separator

NOTE

To keep the best copying quality, perform cleaning periodically (approximately once a month) using the following procedure.

1 Open the front cover.

*If soiling, such as black lines appear on the copy while using the optional Document Processor, the slit glass a is soiled.

Wipe the slit glass with a soft dry cloth.

*Never use water, thinner, organic solvents or alcohol.

a

10-1