Kyocera 4035, 5035 Ady to copy To copy, Press the Start key. Scanning of the originals will start

Section 5 OTHER CONVENIENT FUNCTIONS

4Touch the “2 sided / 1 sided” [“2-sided /1-sided”] key or the “Book / 1 sided” [“Book / 1-sided”] key, as appropriate

to the type of originals being copied and the type of finished copies to be made.

Inch specifications

Ready to copy.				Paper size	Set
				11x81/2"
		Register
2 sided/Separation			Back		Close
1 sided	1 sided	Able to copy 1 sided (separate) or
➔1 sided	➔2 sided
		2 sided copy using 1 sided original,
2 sided	2 sided
		Book original or 2 sided original.
➔1 sided	➔2 sided
Book	Book
➔1 sided	➔2 sided

6Follow the instructions on the right side of the touch panel and verify the direction in which the originals were set.

IMPORTANT!

If the designation for the direction that the originals are set is not correct, copying may be accomplished incorrectly.

Inch specifications

<for 1-sided or 2-sided originals>				<for open-faced originals>
		Paper size	Set			Paper size	Set
		11x81/2"				11x81/2"
Register	Back		Close	Register	Back		Close
	Check direction				Check direction
	Check direction of				Set the book original
	original top side.				top side direct to back.

Metric specifications

Ready to copy.

2-sided / Split

1-sided 1-sidedR1-sided R2-sided

2-sided 2-sided R1-sided R2-sided

BookBook

R1-sided R2-sided

		Paper size	Set
Register	Back		Close

Able to copy 1 - sided (separate) or

2 - sided copy using 1 - sided original, book original or 2 - sided original .

		Rear	Left top
			corner
Metric specifications
<for 1-sided or 2-sided originals>				<for open-faced originals>
		Paper size	Set		Paper size	Set
Register	Back		Close	Register	Back	Close

5Specify the binding direction of the originals. Inch specifications

	<for 2-sided originals>			<for open-faced originals>
ady to copy.				to copy.
Separation			Registe	on	Register
		Original			Original
	1 sided	Open from		1 sided	Open from
d	➔2 sided	left/right		➔2 sided	left
	2 sided	Open from		2 sided	Open from
d	➔2 sided	top		➔2 sided	right
	Book			Book
d	➔2 sided			➔2 sided

Check direction		Check direction
Check direction of		Set book original top
original .		side direction to back .
Back Edge	Left top
	corner

7 Press the [Start] key. Scanning of the originals will start.

If you set the originals in the optional Document Processor,

copying will start automatically.

Metric specifications

<for 2-sided originals>

Ready to copy.

ided / Split		R
		Original
ed	1-sided	Left/Right
sided	R2-sided	binding
ed	2-sided	Top
sided	R2-sided	binding

kBook

sided R2-sided

<for open-faced originals>

to copy.

Register

	Original
-sided	Left
R2-sided	binding
-sided	Right
R2-sided	binding
Book
R2-sided

If you set an original on the platen, a message will appear

telling you to set the next original. In this case, go to the next

step.

8Replace the first original with the next one and press the [Start] key. Scanning of that next original will start.

9Once you have finished scanning all of the originals, touch the “Scanning finished” key. Copying will start.

5-5