Kyocera 3035, 5035, 4035 Default operation mode, Select the main mode, Copy mode, Select main mode

Section 7 COPIER MANAGEMENT FUNCTIONS

●Default operation mode

Perform the following procedure to set whether the display that appears after power is turned on to the copier will be the one for the copy operation mode or for the fax operation mode.

NOTE

This setting is only available when the optional Fax Kit is installed in your copier.

1Display the “Machine default” screen.

(See “(2) Accessing the machine default settings” on page 7-41.)

Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Select the main mode” [“Select main mode”] in the settings list on the left side of the touch panel and then touch

the “Change #” key.

The “Select the main mode” [“Select main mode”] screen will be displayed.

Inch specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Sleep mode changing time	60 Minute
Low power mode chng. time	15 Minute	Down
Select Copy output mode	Inner tray
Select FAX output mode	Inner tray
Select the main mode	Copy mode	Change #
Default setting

Metric specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Sleep mode changing time	60 Minute
Low power mode chng. time	15 Minute	Down
Select COPY output mode	Inner tray
Select FAX output mode	Inner tray
Select main mode	COPY Mode	Change #
Default setting

3Select the "Copy mode" key or the "FAX mode" key, as appropriate.

Inch specifications

Select the main mode Back Close

Select the default display panel mode when the power is on.

Copy mode

FAX mode

Default setting - Machine default

Metric specifications

Select main mode Back Close

Select the default display panel mode when the power is on.

COPY Mode

FAX mode

Default setting - Machine default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-51