Kyocera 3035, 5035, 4035 manual A 1 2 a, Interrupt copying

Section 4 BASIC OPERATION

3. Interrupt copying

Interrupt copying is useful if, during one copy job, you want to copy other originals at different settings. Once the rush job is completed, the interrupted copy job can be resumed at the same settings as before.

1 2 3 A 1 2 A 3

1Press the [Interrupt] key to light the lamp in the [Interrupt] key. “Interrupt mode OK” will be displayed.

4When copying is completed, press the [Interrupt] key once again. The lamp in the [Interrupt] key will go out. Replace the

newly copied originals with the ones removed before. Then, press the [Start] key. The interrupted copy job will be resumed.

2

3

Remove the originals that were currently being copied and put them aside.

Set the new originals and perform the desired copy procedure.

4-9