Original set direction, 11 x 81/2 | Kyocera 3035, 5035, 4035

23. Original set direction

It is necessary to specify the direction in which the originals were set	4	Touch the “Rear” [“Back Edge”] key or the “Left top corner”
whenever you use the 2-sided copy modes, the page separation/split	4	key, as appropriate.
		key, as appropriate.
copy modes, the margin mode, the centering/image shift mode, the		Inch specifications
memo mode, the border erase modes, the combine/merge copy		Inch specifications
memo mode, the border erase modes, the combine/merge copy
modes, the print page numbers mode, the booklet/stitching mode, the
		Ready to copy.			Paper Size	Set
		Ready to copy.			11 x 81/2"
auto selection/filing mode (optional), the staple mode (optional) and			Register
		Orig. set direction		Back		Close
the punch mode (optional). You can also use the following procedure		Orig. set direction		Back		Close
				Check direction
to perform the setting as well.				Check direction of
to perform the setting as well.				original top side.

1Touch the “Function” tab. The content of the “Function” tab will be displayed.

"Check direction original" can be shown at right side of display.

Follow the steps. If setting mode is wrong, incorrect copy will result.

Rear

Left top corner

Metric specifications

Touch the “▼ Down” key. The content of the next portion of the “Function” tab will be displayed.

Touch the “Orig.set direction” key. The “Orig.set direction” screen will be displayed.

Orig. set direction

"Check direction original" can be shown at right side of display.

Set

BackClose

Check direction Check direction of original .

Inch specifications

Follow the steps. If setting mode is wrong, incorrect copy will result .

Back Edge

Left top corner

BasicUser choice FunctionProgram

5-49