Kyocera 3035, 5035, 4035 Erased border width, Desired Inch specifications, Default erase width

Section 7 COPIER MANAGEMENT FUNCTIONS

●Erased border width

Perform the following procedure to determine the default value for the width of the border to be erased in the two border erase modes.

1Display the “Copy default” screen.

(See “(5) Accessing the copy default settings” on page 7-62.) Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Default erase width” in the settings list on the left side of the touch panel and then touch the “Change #” key.

The “Default erase width” screen will be displayed. Inch specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode
		Up
Sort	Sort : On / Offset : Off
Auto Rotation	Rotate	Down
Default margin width	Left 1/4" 0"
Default erase width	Border 1/4"	Center 1/2"
Preset limit	999 Set	Change #

Default setting

Metric specifications

Default setting / Counter

Copy default			Close
Default menu	Setting mode		Up
Sort	Sort : On / Group : Off
Auto Rotation	Rotate		Down
Default margin width	Left 6mm	0mm
Default erase width	Border 6mm Center 12mm
Preset limit	999 Set		Change #

Default setting

3Touch the “+” key or the “-” key under the “Border” and “Center” fields to change the displayed widths to those

desired.

Inch specifications

Default erase width		Back	Close
Adjust default setting of erase width .
	(0~3/4)	(0~11/2)
Border	1/4 " Center	1/2 "
	+	+
	–	–
Default setting - Copy default
Metric specifications
Default erase width		Back	Close
Adjust default setting of erase width.
	(0~18)	(0~36)
Border	6 mm Center	12 mm
	+	+
	–	–

Default setting - Copy default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-81