Kyocera 3035 If you want to delete another ID-code, repeat steps 3, Change registered information

Section 7 COPIER MANAGEMENT FUNCTIONS

4Verify that this is the ID-code that you want to delete, and touch the “Yes” key.

The touch panel will return to the screen in step 3. Inch specifications

Stop

ID-code: 0007

Name to display: 1st Sales Dept.

Are you sure you want to delete this ID-code?

YesNo

Metric specifications

Stop

ID-code: 0007

Name to display: 1st Sales Dept.

Are you sure you want to delete this ID-code?

YesNo

NOTE

If you want to delete another ID-code, repeat steps 3 and 4.

●Change registered information

Perform the following procedure when you want to change a previously registered department name or the corresponding ID-code.

1Access the copy management menu screen.

(See “(2) Accessing the copy management menu screen” on page 7-3.)

Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

5Touch the “Close” key.

The touch panel will return to the screen in step 2.

2Touch the “Management edit” key.

The “Management edit” screen will be displayed.

Inch specifications

Management
Managem. Total		Register/Sett.
Management	Each Mgt.	Management	Management
total	Total	edit	Def. Set.
Default setting

Close

Management

Off

On

Metric specifications

Management				Close
Managem. Total		Register/Sett.		Management
Management	Each Mgt.	Management	Management
total	Total	edit	Def. Set.	Off
				On
Default setting

7-17