Kyocera 4035, 5035, 3035 manual Margin width, Default margin width

Section 7 COPIER MANAGEMENT FUNCTIONS

●Margin width

Perform the following procedure to determine the default value of the location and width of the margins in the margin mode.

1Display the “Copy default” screen.

(See “(5) Accessing the copy default settings” on page 7-62.) Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Default margin width” in the settings list on the left side of the touch panel and then touch the “Change #” key.

The “Default margin width” screen will be displayed. Inch specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode
		Up
Sort	Sort : On / Offset : Off
Auto Rotation	Rotate	Down
Default margin width	Left 1/4" 0"
Default erase width	Border 1/4"	Center 1/2"
Preset limit	999 Set	Change #

Default setting

Metric specifications

Default setting / Counter

Copy default			Close
Default menu	Setting mode		Up
Sort	Sort : On / Group : Off
Auto Rotation	Rotate		Down
Default margin width	Left 6mm	0mm
Default erase width	Border 6mm Center 12mm
Preset limit	999 Set		Change #

Default setting

3Touch the “O” key or the “P” key, and the “M” key or the “N” key, as desired, to change the default margins and margin

widths to the desired setting. Inch specifications

Default margin width	Back	Close
Adjust default setting of margin width .
Front page	(0~3/4)
	0 "
(0~3/4)
Left 1/4	"
Default setting - Copy default
Metric specifications
Default margin width	Back	Close

Adjust default setting of margin width.

Front page

(0~18)

0 mm

(0~18)

Left 6 mm

Default setting - Copy default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-80