Kyocera 5035, 4035, 3035 manual At the end of copying

Section 4 BASIC OPERATION

9

9. At the end of copying

Finished copies will be ejected onto the copy store section.

IMPORTANT!

•Up to 250 copies can be stored on the copy store section.

•If “The output tray exceeds capacity. Remove the paper.” [“Too much paper in output tray. Remove paper.”] is displayed, there are too many copies on the top tray. Remove the copies from the copy store section and then press the [Start] key to resume copying.

•If ejected copies come out curled, or are otherwise not stored cleanly, remove the paper from the drawer[cassette] or the multi- bypass tray (whichever is currently being used), turn the paper over, set it again in that location and try to copy again.

CAUTION

If the copier will not be used for a short period of time (overnight, etc.), turn the power switch OFF (O).

If it will not be used for an extended period of time (vacations, etc.), remove the power plug from the outlet for safety purposes during the time the copier is not in use.

4-4