Kyocera 3035, 5035, 4035 Original size registration, Register orig. size, Original size custom 2x2

Section 7 COPIER MANAGEMENT FUNCTIONS

4. Original size registration

Perform the following procedure in order to register a custom original size that can be used under the “Original size selection” procedure.

1With the content of the “Basic” tab displayed, press the [Default Setting/Counter] key.

The “Default setting”screen will be displayed.

2Touch the “Register orig. size” key.

The “Register orig. size” screen will be displayed. Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

3Select of the “Original size (custom 1)” to “Original size (custom 4)” settings under the “Default menu” column on the

left side of the touch panel and then touch the “Change #” key.

The corresponding setting screen will be displayed. Inch specifications

Default setting / Counter

Register orig. size		Close
Default menu	Setting mode	Up
Original size (custom 1)	2x2"
Original size (custom 2)	2x2"	Down
Original size (custom 3)	2x2"
Original size (custom 4)	2x2"
		Change #

Default setting

Metric specifications

Default setting / Counter

Register orig. size		Close
Default menu	Setting mode	Up
Original size (custom 1)	50x50mm
Original size (custom 2)	50x50mm	Down
Original size (custom 3)	50x50mm
Original size (custom 4)	50x50mm
		Change #

Default setting

4Touch the “+” key or the “-” key to change each of the displayed sizes (Y = width and X = length) to the desired

settings.

If you do not want to register a custom original size, touch the “Off” key.

Inch specifications

Original size (custom 1)	Back	Close
Register custom size original.
(2~115/8)	(2~17)
2 "	2 "

Off

On

Default setting - Register orig. size

Metric specifications

Original size (custom 1)	Back	Close
Register custom size original.
(50~297)	(50~432)
50 mm	50 mm

Off

On

Default setting - Register orig. size

5Touch the “Close” key. The touch panel will return to the screen in step 3.

6Touch the “Close” key. The touch panel will return to the screen in step 2. Touch the “End” key. The touch panel will

return to the contents of the “Basic” tab.

7-90