Kyocera 4035, 5035, 3035 manual Report print out, Print report menu

Section 7 COPIER MANAGEMENT FUNCTIONS

9. Report print out

Perform the following procedure to print out one of the following reports.

< Copy report >

Lists all of the values for the copy default settings. < Machine report >

Lists all of the values for the machine default settings. < Toner coverage report>

Lists the average toner density (black ratio) for each size of copy paper used under each of the copy, printer and fax functions of this machine.

NOTE

Make sure that 11" x 8 1/2" [A4] size paper is loaded in one of the drawers[cassettes].

1With the content of the “Basic” tab displayed, press the [Default Setting/Counter] key.

The “Default setting” screen will be displayed.

2Touch the “Print report” key. Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

3Use the keypad to enter the 4-digit management code. The factory default setting for 30 cpm copiers is “3000”, for

40 cpm copiers is “4000” and for 50 cpm copiers is “5000”. Inch specifications

Enter the administrator number Close

Metric specifications

Enter the administrator number Close

NOTE

It is possible for you to change the 4-digit management code. (See “Changing the management code” on page 7-56.)

4Once the “Print report menu” screen is displayed, touch the “Copy report” key, the “Machine report” key or the “Toner

coverage” key, as appropriate. Inch specifications

Print report

Print report menu	Close
Copy	Toner
report	coverage
Machine
report
Default setting
Metric specifications
Print report
Print report menu	Close
	Toner
Copy
report	coverage
Machine
report
Default setting

7-101