Kyocera 4035, 5035, 3035 manual Screen in . Inch specifications

Section 5 OTHER CONVENIENT FUNCTIONS

6Touch the “Loading Form” key.

A list of registered forms will be displayed. Inch specifications

Select Form	Back	Close
Scan form
once	Overlay first scanned image onto
Loading
	the scanned image or on registered from.
Form

9

10

If you are using the optional Document Processor, make sure that the original that you want to use as the form is on top of the originals that you want to copy.

If you are using the platen, set the original that you want to use as the form.

Press the [Start] key.

Copying will start.

If a message appears telling you to set the next original, go to the next step.

Metric specifications

FormSetselectionform.

Press Start key.

Form selection

Scan form once Loading Form

Paper size	Set
Back	Close
Back	Close

Overlay 1st image on the scanned image or on registered form.

11

12

Replace the first original with the next one and press the [Start] key. Scanning of that next original will start.

Once you have finished scanning all of the originals, touch the “Scanning finished” key. Copying will start.

7Select from that list the image that you want to use and then touch the “Close” key. The touch panel will return to the

screen in step 4. Inch specifications

Select Form					Back	Close
	Form			600dpi	Up
	Form 005	11x8	1/2"
	Form 004
Scan form		11x81/2"
once	Form 003	81/2x11"
Loading	Form 002	11x81/2"
Form
	Form 001	11x81/2"			Down

The arrow means direction of registered form.

Set original and form directions.

Metric specifications

Form selection
	Form	600dpi
	Form006
Scan form	Form005
once	Form004
Loading
Form	Form003

Form002

The arrow means direction of registered form.

Set original and form directions.

BackClose

Up

Down

8Set10. the originals that you want to copy and go directly to step

5-21