Kyocera 3035, 5035, 4035 manual Auto sleep ON/OFF, Date/Time 2001/10/30, Date/Time 30/10/01

Section 7 COPIER MANAGEMENT FUNCTIONS

●Auto sleep ON/OFF

Perform the following procedure to set whether or not to have the auto sleep function automatically engage and turn the copier OFF (O) if no operation is performed on the copier for a designated amount of time.

1Display the “Machine default” screen.

(See “(2) Accessing the machine default settings” on page 7-41.)

Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Auto sleep” in the settings list on the left side of the touch panel and then touch the “Change #” key.

The “Auto sleep” screen will be displayed. Inch specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Date/Time	2001/10/30 14:02
Time difference	GMT+08:00	Down
Management code change	5000
Auto sleep	On
Energy Saver key setting	Low power mode	Change #

Metric specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Date/Time	30/10/'01 14:02
Time difference	GMT+08:00	Down
Change MGMT code with #	5000
Auto sleep	On
Energy Saver key setting	Low power mode	Change #
Default setting

3Touch the “On” key if you want to use the auto sleep function. Inch specifications

Auto sleep Back Close

Autom. turns into sleep mode if no oper. within a set time after last setting,or when copying is done.

On

Off

Default setting - Machine default

Metric specifications

Auto sleep Back Close

Autom. turns into sleep mode if no oper. within a set time after last setting,or when copying is done.

On

Off

Default setting - Machine default

NOTES

•If auto sleep interferes with your copying operations, turn this function OFF. However, it is recommended that you try to set a longer time interval until auto sleep engages before you actually turn it OFF.

•If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-57