Kyocera 3035, 5035, 4035 Default setting Description Available Settings, Factory Reference Setting

Section 7 COPIER MANAGEMENT FUNCTIONS

Default setting	Description	Available
		settings
Touch panel sound ON/	Sets whether or not the touch panel will emit a “beep”	On / Off
OFF	sound each time a key is touched.
Silent mode ON/OFF	The copier can be switched to a silent mode, which	On / Off
	shortens the length of time that the laser data writing
	motor continues to spin after each copy job is finished.
	Turn the silent mode ON if the noise of the motor
	bothers you in any way.
Day & time	Sets the current date and time.	Year: 2001-2049
		Month: 1 – 12
		Day: 1 – 31
		Time: 00:00 – 23:59
Time difference	Sets the time difference from the world standard time	+12:00 – -12:00
	(GMT).
Changing the	Changes the management code that is used by the copy	0000 – 9999
management code	manager.
	IMPORTANT:
	If you change the management code from its factory
	default, be sure to keep some sort of record of the new
	management code. If, for any reason, you forget the
	registered management code, you will need to contact
	your service representative.
Auto sleep ON/OFF	Sets whether or not to have the auto sleep function	On / Off
	automatically engage and turn the copier OFF (O) if no
	operation is performed on the copier for a designated
	amount of time.
	* If auto sleep interferes with your copying operations,
	turn this function OFF. However, it is recommended
	that you try to set a longer time interval until auto sleep
	engages before you actually turn it OFF.
	* For more detailed information on turn the auto sleep
	function, see page 4-11.
Changing the energy-	Changes the energy-saving mode that will be entered	Low power mode
saving mode	into when the [Energy Saver] key is pressed.	Sleep mode
	(See “5. Energy-saving modes” on page 4-11 for more
	information.)
	* This setting is displayed when the optional Printer Kit
	or Printer/Scanner Kit is installed.
	If you are using a standard copier, or if the optional Fax
	Kit is installed in your copier, you can press the
	[Energy Saver] key to engage the Low power mode.

Factory	Reference
setting	page
On	7-52
Off	7-53
Year: 2001	7-54
Month: 01
Day: 01
Time: 00:00
00:00	7-55
30 cpm copiers:	7-56
3000
40 cpm copiers:
4000
50 cpm copiers:
5000
On	7-57
Low power	7-58
mode

7-40-1