Dito Dean Installation Instructions for Super Runner Series Gas Fryers SR42, SR52, SR62

SUPER RUNNER SERIES GAS FRYERS

CHAPTER 1: INSTALLATION INSTRUCTIONS

		Frypot Assembly
Manifold Support Bracket		1/2—3/4 Reducer
		Bushing
Gas Burner		Gas Valve
See Detail A		Burner
Orifice		1.63-inch [41-mm]
		1.30-inch [33-mm]
Pressure
Test		Gas Manifold
Spigot	Gas	Orifice
	Manifold
	Assembly
		Detail A
Temperature		Burner/Orifice Location
Control

Typical gas valve, burner and orifice locations (SR42 shown above).

1.6 Gas Conversion Components

Use the following components to convert from natural gas to propane and vice- versa. See Section 1.5 for orifice quantities required for conversion.

Propane Applications:

Proper Regulator Must Be Installed

Natural Gas to Propane Kit. 826-1817		Propane To Natural Gas Kit, 826-2017
Bushing, NPT Flush, SR 42 series only		Bushing, NPT Flush, SR 42 series only
Pilot Orifice (16LP) CE & Non-CE		Pilot Orifice (26N) CE & Non-CE
Burner Orifice, 1.51mm- CE ONLY: All Super Runner		Burner Orifice, 2.40mm- CE ONLY: All Super Runner
Series		Series
Burner Orifice, 1.51mm	(#53)- NON-CE ONLY: SR52	Burner Orifice, 2.53mm	(#39)- NON-CE ONLY: SR52
& SR62 Series Only		& SR62 Series Only
Burner Orifice, 1.70mm	(#51)- NON-CE ONLY: SR42	Burner Orifice, 2.80mm	(#35)- NON-CE ONLY: S42
Series Only		Series Only
Rating label, contact factory at time of conversion		Rating label, contact factory at time of conversion

* Burner orifices listed above are for fryers operating at altitudes of 2000 feet (610 meters) or less. For altitudes greater than 2000 feet (610 meters), contact the factory for the correct orifice size.

1-6