SUPER RUNNER SERIES GAS FRYERS
CHAPTER 2: OPERATION
DANGER
cooking oil or water covers the burner tubes before lighting the burners.
2.With the pilot lit, push down and slowly turn the gas valve knob to the ON position.
3.Rotate the operating thermostat knob to the desired frying temperature. The burner should light and burn with a strong blue flame.
DANGER
If the pilot and burners go out, the fryer must be completely shut down at least five minutes before re-
lighting.
2.2 Shutting the Fryer Down
For temporary shutdown, turn the operating thermostat to the OFF position and cover the frypot.
For complete shutdown, turn the operating thermostat to the OFF position, turn the gas valve knob to the OFF position
2.3 Daily Operation
1.Do not allow grease to accumulate or harden on the frame, body, or flue of the fryer. Clean the fryer inside and out with a solution of detergent and hot water daily.
2.Filter the cooking oil by draining the frypot through a filter cone at least daily. After the oil has been drained from the frypot, remove any residue from the pot, using a scraper if necessary.
3.Clean the frypot at least once each week by filling it to just below the upper oil level mark with water. Add one cup of detergent and bring the solution to a boil. Allow the solution to simmer for
2.4 Recommended Spare Parts
| PART # | PART # | PART # | PART # |
DESCRIPTION | SR42- NON- | SR42- CE | SR52/SR62- | SR52/SR62- CE |
| CE |
|
|
|
Operating Thermostat | ||||
Thermopile | ||||
Thermocouple | N/A | N/A | ||
Pilot Burner, Natural Gas | ||||
Pilot Burner, Propane Gas | ||||
Pilot Bracket, AGA | N/A | N/A | ||
Pilot Thermopile Bracket | N/A | N/A | ||
Piezo Ignitor Trigger | N/A | N/A | ||
Piezo Ignitor Bracket | N/A | N/A | ||
Piezo Ignitor Electrode | N/A | N/A | ||
Orifice, Natural | ||||
Orifice, Natural, units built after 4/07 | N/A | N/A | ||
Orifice, Propane | ||||
Orifice, Propane, units built after 4/07 | N/A | N/A | ||
Gas Valve, Natural | ||||
Gas Valve, Propane | ||||
Leg | ||||
Caster, | ||||
Caster, |