Kyocera 5035, 4035, 3035 manual Name as desired Inch specifications, Box, Password

Section 7 COPIER MANAGEMENT FUNCTIONS

3If you want to change the name of that box, first select “Box name” and then touch the “Change #” key. Enter the new

name as desired.

Inch specifications

Box007		Close
Default menu	Setting mode	Reset
Box name	ABCD_0000101	Box
Password	(No register)
		Change #
Default setting - Document Management - Box editing
Metric specifications
Box 007		Close
Default menu	Setting mode	Reset
Box name	ABCD_0000101	Box
Password	(No register)

Change #

Default setting - Document management - Box editing

NOTE

Refer to “11. Entering characters” on page 7-104 for information on entering characters.

4If you want to change the name of that box, first select “Password” and then touch the “Change #” key. The

“Password” screen will be displayed.

5Use the keypad to enter the new password for that box and then touch the “Close” key. The new password will be

registered and the touch panel will return to the screen in step 3.

Inch specifications

Password	Back	Close
Enter new password.
Password	(Enter by #key)
	Clear

Default setting - Document Management - Box editings - 007

Metric specifications

Password	Back	Close
Enter new password.
Password	(Enter #-key)
Clear
Default settund - Document management - Box editing - 007

NOTES

•The password can be between 1 and 8 digits long.

•If you decide not to register a password for that box, touch the “Clear” key and then, with nothing entered in the password field, touch the “Close” key.

6If you want to delete all of the data in that box, select “Reset Box”. A verification screen will be displayed.

7Touch the “Yes” key or the “No” key, as appropriate. Inch specifications

Stop

Box No. : 007

Box name : ABCD_0000101

Reset this Box. Do you really want to reset?

YesNo

Metric specifications

Stop

Box No. : 007

Box name : ABCD_0000101

Reset this Box. Do you really want to reset?

YesNo

If you selected “Yes”, all the data in the selected box will be deleted and the touch panel will return to the screen in step 3.

If you selected “No”, the touch panel will return to the screen in step 3 without deleting any data.

8Touch the “Close” key. The touch panel will return to the screen in step 2.

9Touch the “Close” key. The touch panel will return to the screen in step 1. Touch the “Close” key. The touch panel will

return to the “Default setting” screen.Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-97