Kyocera 4035, 5035, 3035 manual Default copy limit, Def. Val. of coun. limit

Section 7 COPIER MANAGEMENT FUNCTIONS

●Default copy limit

Perform the following procedure when you want to change the default copy limit for new department ID-codes.

1Select “Def. Val. of coun. limit” under the “Setting item” column on the left side of the touch panel and then touch the

“Change #” key.

The “Def. Val. of coun. limit” screen will be displayed. Inch specifications

Managem. Def. Set.			Close
Setting item		Value
Scanner Managem.	On
Fax Management	On
Excess of limit Setting	Unable to use
Def. Val. of coun. limit	999999
Total size 1	81/2x11"	No specif.
Total size 2	81/2x11"	No specif.	Change #
Total size 3	81/2x11"	No specif.

Default setting - Management - Managem. Def set.

Metric specifications

Managem. Def. Set.			Close
Setting item		Value
Scanner Managem.	On
Fax Management	On
Excess of limit Setting	You cannot use
Def. Val. of coun. limit	999999
Total size 1	A3	No specif.
Total size 2	B4	No specif.	Change #
Total size 3	A4	No specif.

Default setting - Management - Managem. Def set.

2Use the numeric keys on the keypad to enter the default copy limit. The limit can be set to any 1-page increment up to

999,999.

Inch specifications

Def. Val. of coun. limit	Back	Close
Default value of counter limit can be set.
(1~999,999)
Limited value	999,999
	Clear

Default setting - Management - Managem. Def set.

Metric specifications

Def. Val. of coun. Limit	Back	Close
Default value of counter limit can be set.
(1~999,999)
Limited value	999,999
	Clear

Default setting - Management - Managem. Def set.

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 1.

3Touch the “Close” key.

The touch panel will return to the screen in step 1.

7-34