Kyocera 4035, 5035, 3035 Cleaning the related parts, Cm, remove the grid cleaner and then push

Section 10 MAINTENANCE AND OPERATION INFORMATION

<Cleaning the related parts>

10 Push the electrostatic section (with the blue handle) to the right and then pull it out about 2 inches (5 cm).

11 Remove the cap from the grid cleaner.

12 Attach the grid cleaner to the machine body aligning with the notches.

13 Pull the electrostatic section out as far as it will go and then push it back into the copier to a point just BEFORE the roller

Atouches the white pad of the grid cleaner. Repeat this step a few times.

IMPORTANT!

DO NOT push the electrostatic section all the way back into the copier in this step as that may result in problems appearing in the printed images.

14	With the electrostatic section pulled out about 2 inches
	(5 cm), remove the grid cleaner and then push the

electrostatic section all the way back into the copier.

15 Fit the new waste toner box into the copier.

10-5