•Unscrew the 4 screws and remove the washers situated further back from the front part of the mo- tor body (A) Using these 4 screws screw in the rear grate (Q), leaving the carrying handle (E) on the up- per part of the appliance.
Once you have finished using the appliance:
•Stop the appliance, selecting position 0 on the selector control.
•Unplug the appliance from the mains.
• Insert the fan propeller (D) in the motor shaft (R) | Carry handle: |
until the hole in the fan propller coincides with mo- |
|
tor shaft groove. Next use the fan propeller tighten- | •This appliance has a handle on the back to make |
ing screw to tighten it completely. | it easy and convenient to transport. |
• Position the front grill (P) on to the back grill (Q), | Safety trip switch: |
press them together ensuring that an accurate fit- |
|
ting between the two grills and alignment with the | •The appliance has a safety trip switch that protects |
clips on the front grill. Make sure that the hole in the | the appliance from overheating. |
front grill coincides with the security screw (O). |
|
| Cleaning |
• To ensure that the front and rear grills are securely |
|
fitted together secure each one with the security | • Disconnect the appliance from the mains and al- |
screw (O). This should be introduced through the | low it to cool before undertaking any cleaning task. |
hole so that the grille's cannot be separated without | • Clean the equipment with a damp cloth with a few |
the help of a tool. | drops of |
| |
| • Do not use solvents, or products with an acid or |
Instructions for use | base pH such as bleach, or abrasive products, for |
| cleaning the appliance. |
Use: | • Do not let water or any other liquid get into the |
| air vents to avoid damage to the inner parts of the |
• Unroll the cable completely before plugging it in. | appliance. |
• Connect the appliance to the mains. | • Do not submerge the appliance in water or any |
• Guide the appliance to direct the flow of air in the | other liquid. |
desired direction. |
|
• Select the desired speed. | Anomalies and repair |
Height Adjustment: | • Take the appliance to an authorised technical |
| support service if problems arise. Do not try to dis- |
•The height of the appliance can be adjusted by mantle or repair without assistance, as this may be loosening the control situate the appliance at the dangerous.
desired height and tighten the control. | • If the connection to the mains has been damaged, |
| it must be replaced and you should proceed as you |
Oscillation function: | would in the case of damage. |
•The oscillation function makes it possible to direct the flow from the apparatus so that it automatically alternates over a range of 75º.
•To activate this function press the oscillation func- tion control (T).
MW_EX35920_Elegant_Breeze 16'_fan_IM.indd 4
7/7/2009 2:38:33 PM
