Procedure

Note: The heatsink and blowers are one assembly part.

1. Remove the screws and lift out the heatsink and blower assembly.

Important: Do not attempt to transfer blowers from one heatsink to another. This can create acoustic issues.

2.If the heatsink was removed to facilitate another procedure and will be reinstalled, follow the procedures in the Logic Board chapter about replacement of thermal pads.

3.If installing a replacement heatsink, and the thermal pads are not pre-installed, follow the procedures in the Logic Board chapter to install the thermal pads.

Important: Do not install a heatsink with damaged or missing thermal pads.

Heatsink and Blowers Assembly

PowerBook G4 (15-inch FW800) Take Apart - 105

Page 107
Image 107
Apple FW800 manual Procedure