JVC FS-H35 manual Connecting Speakers, 2Insert the end of the speaker cord into, the terminal

Models: FS-H35

1 32
Download 32 pages 27.24 Kb
Page 10
Image 10
To connect an outdoor AM antenna

AM antenna

1

Vinyl-covered wire

(not supplied)

2

AM loop antenna

(supplied)

1Connect the AM loop antenna to the AM LOOP terminals as illustrated.

2Turn the AM loop antenna until you have the best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. The AM loop antenna must remain connected.

For better reception of both FM and AM

Make sure the antenna conductors do not touch any other terminals and connecting cords.

Keep the antennas away from metallic parts of the unit, connecting cords, and the power cord.

Connecting Speakers

1

2

Speaker cord

 

 

Speaker cord

Right speaker

Left speaker

1Press and hold the clamp of the speaker terminal on the rear of the unit.

2Insert the end of the speaker cord into

the terminal.

Match the polarity between the unit and the speaker terminals: ª to ª and · to ·.

3Release your finger from the clamp.

DO NOT connect speakers while the power is on.

DO NOT connect more than one speaker to each speaker teminal.

IMPORTANT: Use only speakers with the same speaker impedance as shown on the speaker terminals on the rear of the unit.

7

Page 10
Image 10
JVC FS-H35 Connecting Speakers, 2Insert the end of the speaker cord into, the terminal, To connect an outdoor AM antenna