Olympus manual Running DSS Player, Start Windows Connecting the DM-1 to your PC

Running DSS Player

Running DSS Player

It is assumed that the DSS Player has been installed.

If you connect the DM-1 before installing DSS Player, the “Add New Hardware Wizard” dialog box will open. If this happens, click on [Cancel] to exit the wizard, then install DSS Player.

1 Start Windows. 4

2 Connecting the DM-1 to your PC.

For the connection procedure,

refer to “Connecting to Your PC” (→ P.36).

3 Click on the [Start] button.

4 Point to <Programs>, then choose “Olympus DSS Player 2000 for DM-1”.

Click on the <Olympus DSS
5 Player 2000 for DM-1>	3	5
button.

Before disconnecting the DM-1 from your PC, refer to “Disconnecting from Your PC” (→ P.37).

·················································································

Note

You will not be able to run the included DSS Player 2000 for DM-1 and DSS Player 3.0/3.1/3.5 for DS-150/320 at the same time.

38