Connecting to Your PC

Connecting to Your PC

Be sure to finish installing DSS Player before connecting the DM-1. If you connect the DM-1 before installing DSS Player, the “Add New Hardware Wizard” dialog box will open. If this happens, click on [Cancel] to exit the wizard, then install DSS Player.

Once you connect the DM-1 to your PC, the included USB cable (CB-USB1) will supply the power so you will not have to use batteries or an AC adapter with the DM-1.

 

Connecting to Your PC

4

Push the SmartMedia all the way

1 into the slot (P.12).

2 Set the DM-1'sPOWER/LOCKswitch to ON.

3 Deactivate HOLD.

4 Insert end A of the USB cable to your PC's USB port or USB hub.

5 Confirm that the DM-1 is not in use before attaching end B of the

5USB cable to the PC terminal port of the DM-1.

“REMOTE” is displayed on DM-1 if the USB cable is connected.

36

Page 36
Image 36
Olympus DM-1 manual Connecting to Your PC, Push the SmartMedia all the way, Into the slot → P.12