Troubleshooting

Symptom

 

Probable cause

 

Action

 

Nothing

The batteries are not loaded properly.

 

Verify polarity is correct.

appears on

 

 

 

The batteries are dead.

Replace with new batteries.

the display

 

 

 

The POWER/LOCK switch is set to OFF.

Set the POWER/LOCK switch to

 

 

 

 

ON.

 

 

 

 

 

 

 

 

If none of these suggestions works

Reset the recorder (P.57).

Won’t start

 

The recorder is in HOLD mode.

 

Release the recorder from HOLD

 

 

 

 

(

P.57).

 

 

 

 

 

 

 

 

The SmartMedia card is not formatted.

Format the SmartMedia card

 

 

 

 

(

P.55).

 

 

 

 

 

 

 

 

The batteries are dead.

Replace with new batteries.

Unable to

 

The SmartMedia card has a write-protect seal

 

Remove the seal.

 

record

attached to it.

 

 

 

 

 

 

 

 

 

 

 

The SmartMedia card is unformatted.

Format the SmartMedia card.

 

 

The SmartMedia card does not have enough memory.

 

Erase unnecessary files or insert

 

 

 

 

another SmartMedia card.

 

 

 

 

 

 

 

The maximum number of files has been reached.

Check another folder.

 

 

MUSIC mode is active.

 

Set the MODE switch to VOICE.

No playback

 

The earphone is connected.

 

Unplug the earphones to use the

tone heard

 

 

internal speakers.

 

 

 

 

 

 

 

 

The VOLUME control is set to 0.

Adjust the VOLUME control.

Unable to

 

The file is locked.

 

Unlock the file (

P.32,49).

erase

The SmartMedia card has a write-protect seal

 

Remove the seal.

 

 

 

attached to it.

 

 

 

 

Noise heard

 

The recorder was shaken during recording.

 

 

during

 

 

 

The recorder was placed near a cell phone or

Move the recorder.

playback

fluorescent lamp while recording or during playback.

 

 

 

 

Recording

 

The microphone sensitivity is too low.

 

Set the microphone sensitivity to

level too low

 

 

CONF mode and try again.

Unable to set

 

The maximum number of index marks (16) has been

 

Erase unnecessary index marks

index marks

reached.

 

(

P.27).

 

 

 

 

 

 

 

 

 

The SmartMedia card has a write-protect seal

Remove the seal.

 

 

 

attached to it.

 

 

 

 

 

 

 

 

 

 

 

 

The file is locked.

 

Unlock the file (

P.32,49).

Won’t work

 

A non-standard AC adapter is being used.

 

Use the Olympus A321 (for US,

with AC

 

 

Canada) or A322 (for Europe

adapter

 

 

except U.K) AC adapter

 

 

 

 

(Oprional).

 

Troubleshooting

59

Page 59
Image 59
Olympus DM-1 manual Troubleshooting, Symptom Probable cause Action