NEC NDA-24298 manual Aispl Assignment of Incoming Selection Pattern Data for LDM

AISPL : Assignment of Incoming Selection Pattern Data for LDM

AISPL: Assignment of Incoming Selection Pattern Data for LDM

1.General

This command is used to assign additional digits information with respect to the Incoming Selection Translation Pattern Number (PNI). This data is written in Local Data Memory (LDM).

2.Precautions

1.Since the PNI is an intermediate parameter to the ASTPL command, assign the PNI for the incoming route number by the ASTPL command before assigning the AISPL command.

2.The system processes the ASTPL/AISPL command prior to the numbering plan data. Thus, if the LCR access code is added to the received numbers by the ASTPL/AISPL command, the system processes the LCR related command such as ASPAL/AFRSL/AOPRL.

3.Data Entry Instructions

PNI

Enter the PNI assigned by the ASTPL command.

DC

Enter desired additional numbers within 4 digits.

INCOMING SELECTION TRANSLATION PATTERN NUMBER	ADDITIONAL DIGIT INFORMATION
(PNI)	(DC)
1-15	MAXIMUM 4 DIGITS

1

REMARKS

CHAPTER 4 NDA-24298

Page 354

Issue 1