NEC NDA-24298 manual Asat Assignment of Specific Attendant Number Data

ASAT : Assignment of Specific Attendant Number Data

ASAT: Assignment of Specific Attendant Number Data

1.General

This command assigns a specific Attendant Number that allows a station user to access the desired operator.

2.Precautions

1.The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX 92, bit3=1), assign TN parameter as data “1” for all tenants.

2.The specific Attendant Number cannot be a station number or LDN already being used.

3.The maximum number of Attendant Consoles should be assigned by the ASYD command, SYS 1, INDEX 9.

3.Data Entry Instructions

TN

Enter the tenant number which affects the special attendant number

ACC

Enter the special attendant number according to the station numbering plan.

TENANT NUMBER	ACCESS CODE (ACC)				ATTENDANT NUMBER	REMARKS
(TN)	MAXIMUM 5 DIGITS				(ATN)
1	6	0	0	1	1

ATN

Enter the ATN which corresponds to the TK parameter assigned by the ATRK command

CHAPTER 4 NDA-24298

Page 590

Issue 1