NEC NDA-24298 manual Digits Number, NND ATT Maximum BLF Digits

ANPDN : Assignment of Numbering Plan Data for Network Data Memory

ANPDN: Assignment of Numbering Plan Data for Network Data Memory

1.General

This command assigns the minimum number of digits needed to determine the service (Telephone Number) that is required by the first digit received (pre-translation). The data assigned with this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.This command is used for the Business Application.

2.The applicable Tenant Number (TN) range is designated by the ASYDN command, SYS 1, INDEX 8.

If the numbering plan is common for all tenants (ASYDN, SYS1, INDEX 800, bit2=1), assign TN parameter as “1” for all tenants.

3.The system data assignment (ASYDN, SYS 1, INDEX 514, bit1=1) is needed to provide the Network Data Memory (NDM).

4.For detailed information, see the NEAX2400 IPX Fusion Network System Manual.

3.Data Entry Instructions

1st DC

The first digit of access code for Telephone Number. (0-9,*, #)

NND

The first digits analyzed, prior to the ASPAN command to assign a different number of digits for this, assign the minimum number of digits in this parame- ter.

			NUMBER OF	BUSY LAMP FIELD
TENANT		CONNECTION	NECESSARY	DISPLAY ACTIVATED
	1st DIGIT CODE	STATUS INDEX	DIGITS	ON
NUMBER
(TN)	(1st DC)	(CI)	(NND)	A ATT
		N/H/B	MAXIMUM 6	(BLF)
			DIGITS	0/1
				0
	CI			BLF
	The status of the 1st DC dialed

N = Normal (Idle) Not used (Fixed to 0)

H = Hooking

B = Busy

NDA-24298CHAPTER 4

Page 925

Issue 1