NEC NDA-24298 manual Aldnn Assignment of Listed Directory Number for NDM, Teln, Type, Fpc

ALDNN : Assignment of Listed Directory Number for NDM

ALDNN: Assignment of Listed Directory Number for NDM

1.General

This command is used to assign the Listed Directory Number (LDN) which allows a Direct Inward Dialing (DID) call to terminate to Attendant Consoles within the Fusion Network. The data assigned by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.When the LDN number assigned by this command is dialed from PSTN, the call terminates to Attendant Consoles during the Day mode, and redirects to a station or outside party in the Night mode. Any ATTCON or station within the Fusion Network can be designated as the destination the call to be terminated.

2.The numbering of the LDN assigned by this command must conform to the numbering plan data. (The ANPDN command and the ASPAN command (SRV = TELN))

3.This command is an available software enhancement.

3.Data Entry Instructions

(a)TYPE = 0 (No Night Transfer) is selected;

L-TELN

Enter desired DID number to terminate the call to

Attendant Console in Day mode.

USER	TELEPHONE NUMBER OF	FUSION
GROUP
	LISTED DIRECTORY NUMBER	POINT CODE
NUMBER
	(L-TELN)	(FPC)
OF LDN
	MAX. 16 DIGITS	1-253
(L-UGN)

TYPE

0 = No Night Transfer

1 = TELN

2 = To Outside

3 = ADC

TENANT

NUMBER TYPE REMARKS (TN)

0

FPC

Enter the FPC of the Node accommodating the Attendant Console to which DID call to be terminated.

NDA-24298CHAPTER 4

Page 347

Issue 1