NEC NDA-24298 Admin Numbering Plan, Agnp and Agsp for guest Numbering plan Index Is changed From

ASYD : Assignment of System Data

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX						SYSTEM DATA CONTENTS
TYPE		00 - FF
(SYS)	(INDEX)	(Hex)	DATA
	0 - 511				BIT
			0/1
			1		b0	Hotel Feature required (Fixed Data)
			1		b1	Hotel Service kind (Fixed Data)
					b2	Length of Room Status Memory
						0/1 = 8 byte/24 byte
			0		b3	Pattern of Key Arrangement on Attendant
						Console
			0		b4	(Refer to Table 4-1.) (Usually, 00)
					b5	Guest Name Service 0/1 = Out/In Service
						Numbering Plan Data Table of Guest
						Station and Admin. Stations
						0/1 = Separate/Common
						Note 1: If data is assigned as 1, only use
						commands AANP and AASP to
						assign	Admin.		and	guest
						numbering plan. If data 0 is
						assigned, use AANP and AASP for
1	160					Admin.	numbering		plan	and	(for Hotel system)
						AGNP and AGSP for guest
					b6
						numbering plan.
						Note 2: If this	index	is changed		from
						separate	to	common,		data
						memory will be fragmented. To
						recover the system, change this
						index to separate, delete all
						AGNP; then, delete all guest
						stations. Reassign this index as
						common and delete all AASP data
						for the Admin. Reassign data as
						needed.
						Fixed to 0.
						Note: This data is available in both
					b7	Business and Hotel applications.
						Do not assign “*” or “#” as the
						last digit of the feature access
						code. No station may use “*” or
						“#” in numbering.

NDA-24298CHAPTER 4

Page 123

Issue 1