NEC NDA-24298 manual Always assign data0

ARTDN : Assignment of Route Class Data for NDM

							LGRT					REMARKS
							1-899
FUNCTION
		ISDN transmitting information
			0 =	Out of Service
98	CI		1 = 16-Digit Caller Number Service, Attribute Informa-
				tion Notification Service, and Calling Sub-Address
				Transfer Service
		2-15= Not used
99	OID							0	0	0	0	Always assign data“0.”
100	TKS							0	0	0	0	Always assign data“0.”
		Pad Control Data 2										PAD value can also be
												set by switch setting on
101	PAD2	0-7 =		For Pad value, See the NEAX2400 IPX Circuit Card
												the 8TLT (Long Line
		Manual.
												Telephone = TELT) card.
102	TRM							0	0	0	0	Always assign data “0.”
103	TRPX							0	0	0	0	Always assign data “0.”
104	LDR							0	0	0	0	Always assign data “0.”
105	TSC							0	0	0	0	Always assign data “0.”
106	SATS							0	0	0	0	Always assign data “0.”
107	RVPX							0	0	0	0	Always assign data “0.”
108	DQ							0	0	0	0	Always assign data “0.”
109	SLOV	Slumber Time Override Service						0	0	0	0
		0	=	Out of Service	1	=	In Service
		System message automatic output when Connection Ac-
110	SDTO	knowledge signal has not been received.
		0	=	Out of Service	1	=	In Service
111	ADVPRA	ISDN PRI Failure Routing Service										This data is valid for
		0	=	Out of Service	1	=	In Service					dummy routes.
112	IND	Inter-office Name Display
		0	=	Out of Service	1	=	In Service
113	UUI							0	0	0	0	Always assign data “0.”
114	DCH							0	0	0	0	Always assign data “0.”
115	CMRT	Common use of Route Numbers of ISDN trunks
		0	=	Out of Service	1	=	In Service
116	PREF							0	0	0	0	Always assign data “0.”
117	DFS							0	0	0	0	Always assign data “0.”
118	BOB	Broad Band					N ⋅ 64K	0	0	0	0
		0	=	64K	1	=
119	HO1CH							0	0	0	0	Always assign data “0.”
120	IFR	Indonesia Compulsion Cut Service						0	0	0	0	Always assign data “0.”
		0	=	Out of Service	1	=	In Service

CHAPTER 4 NDA-24298

Page 548

Issue 1