NEC NDA-24298 manual Duration, Pause, Case of Speed, Calling System, Or Adding

ARTD : Assignment of Route Class Data

										RT					REMARKS
FUNCTION
		Sender Inter-Digit Pause Index													Note: Possible to use
			0	=	DP/1 sec., PB/0.5sec.		1	=	600 msec.						when adjusting
			2	=	800 msec.		3	=	1000 msec.						the duration of
			4	=	1200 msec.		5	=	1400 msec.						Pause in the
			6	=	1600 msec.		7	=	1800 msec.	Note					case of Speed
			8	=	2000 msec.		9	=	2200 msec.						Calling System
		10		=	2400 msec.		11 =		2600 msec.						or Adding
		12		=	2800 msec.		13 =		3000 msec.						digits.
81	LPTM	14		=	3200 msec.		15 =		3400 msec.
		(In case of MFC)
			0	=	12.0 sec.		1	=	5.5 sec.
			2	=	7.0 sec.		3	=	8.5 sec.
			4	=	10.0 sec.		5	=	11.5 sec.
			6	=	13.0 sec.		7	=	14.5 sec.
			8	=	16.0 sec.		9	=	17.5 sec.
		10		=	20.0 sec.		11 =		22.0 sec.
		12		=	24.0 sec.		13 =		26.0 sec.
		14		=	28.0 sec.		15 =		30.0 sec.
82	RSAX										0	0	0	0	Always assign data “0."
83	CST										0	0	0	0	Always assign data “0."
84	CSEG										0	0	0	0	Always assign data “0."
85	CSEU										0	0	0	0	Always assign data “0."
86	CSEL										0	0	0	0	Always assign data “0."
87	CMP										0	0	0	0	Always assign data “0."
88	TALK										0	0	0	0	Always assign data “0."
89	FOT										0	0	0	0	Always assign data “0."
90	RST										0	0	0	0	Always assign data “0."
		Trunk Override Calling
91	TOCI	0		=	Override Inhibited (Calling side).
		1		=	Tie Line Override Service is provided (Calling side).
		Trunk Override Called
92	TOCD	0		=	Override Inhibited (Called side).
		1		=	Tie Line Override Service is provided (Called side).
93	ODGD										0	0	0	0	Always assign data “0."
94	RLS										0	0	0	0	Always assign data “0."
		Gate Way Data Service
95	GWD			0 =		Out of Service	1	=	Gate Way System
		2-15			=	Not used
96	H1	ISDN H1 Switching
		0		=	–		1	=	In Service
97	DT										0	0	0	0
							NDA-24298								CHAPTER 4
															Page 529
															Issue 1