NEC NDA-24298 manual Astd Assignment of State Translation Data, Stm Sts

ASTD : Assignment of State Translation Data

ASTD: Assignment of State Translation Data

1.General

This command translates the system attributes.

2.Precautions

One STM contains multiple numbers of STS(s), and the combination of the STM”n” and STS”n” has one kind of (or multiple kinds of) purpose(s) to be designated. The data zero (0) or one (1) assigned in ST designates how the system works. See Table 4-3for Assignment of ASTD.

3.Data Assignment Instructions

See Table 4-3.

Table 4-3 List for Assignment of ASTD

STM		STS		ST
				* = standard settings
		Processing at the time of originating an outgoing	0	If the calling station is that of RSC = 1, 3, the call
				is outgoing via LCR
		C.O. line call
			1*	The call is processed by second dial tone system.
		Processing for an override from a station into a	0	Override not allowed
		connection between COT and another station
			1*	Override allowed
		Passing dial tone	0	Invalid
	0		1*	Valid
		Processing for warning tone sending at the	0	Warning tone is sent out to both the ATT and the
		moment when ATT has overridden into a		station.
		connection between COT and a station (Busy
0			1*	Warning tone is sent out to both the station, ATT,
		Verification)		and C.O. side.
		Processing for a warning tone sending at the	0	Warning tone is not sent out the C.O. side.
		moment when ATT has overridden into busy
			1*	Warning tone is also sent out to the C.O. side.
		COT (Attendant Override)
	1	Kind of trunk to be seized for an outgoing C.O.	0	BWT only
		line call from ATT
			1*	Either BWT or OGT as the case may be
	2	Tandem connection with COT included	0	Restricted
			1*	Allowed (depending on ARRC)
	3	Enable Passing Dial Tone	0*
	4	Busy Verification Tone for Att. and Sta. only	0*

NDA-24298CHAPTER 4

Page 203

Issue 1