NEC NDA-24298 Auidl Assignment of User ID Data for LDM, User ID MAX Digits Grade YEAR, MONTH, DAY

AUIDL : Assignment of User ID Data for LDM

AUIDL: Assignment of User ID Data for LDM

1.General

This command is used to assign the User ID data such as user name and password for the purpose of logging in to the PBX from the MAT in stand-alone system, or logging in to each Local Node (LN) in Fusion network. Once programming the login information, User ID entry is necessary to login from the next time. This data is written in Local Data Memory (LDM).

2.Precautions

1.Prior to this command, LDM block is assigned by ASYDL, SYS1, INDEX 513.

2.ASCII code is available for “User ID”

3.User information only in LDM data is effective for stand-alone system. In case the login information is assigned in LDM data in Fusion network, the data is valid only in the Local Node to which the login infor- mation is registered.

4.A maximum of 127 User ID data can be assigned per a LN in LDM data.

5.Error message is indicated when the specified User ID duplicates to the existing User ID in LDM/NDM data. If you want to use this User ID in LDM data, it must be deleted from NDM data beforehand.

3.Data Entry Instructions

USER ID Assign the User ID via 16 bytes ASCII code.

USER ID

MAX. 16 DIGITS

GRADE	YEAR, MONTH, DAY
Not used.	Enter the date when login
	information is assigned.

PASSWORD	GRADE	YEAR	MONTH	DAY	REMARKS
MAX. 8 DIGITS

PASSWORD

Enter the password two times for sure in the MAT display. The assigned password is displayed as “∗∗∗∗∗∗ ” on the MAT.

CHAPTER 4 NDA-24298

Page 208

Issue 1