NEC NDA-24298 manual Aplnn Assignment of Physical Lens Number for NDM

APLNN : Assignment of Physical LENS Number for NDM

APLNN: Assignment of Physical LENS Number for NDM

1.General

This command changes the existing station data allocated to each TELN (Telephone number) such as FPC, LENS, Tenant Number, and Station.

2.Precautions

1.This command can be used only when logging in to the NCN (Network Control Node).

2.This command is used for business service only. (Not available for Hotel system and PCS stations.)

3.The new physical station to be allocated to the designated TELN must be the station that belongs to the NCN or the LN within the same Fusion Network link as the logged-in NCN.

4.When entering a new station that already has another Telephone Number, changing the station data cannot be executed.

5.In case NUMBER SHARING is set to the old station designated by UGN/TELN, Dterm must be used at the new station. If other equipment than Dterm is used for the new station, station data change cannot be activated.

6.Station data changing cannot be executed for the UCD station.

7.If the designated old station has the HOT LINE data, station data changing is not available when hot line terminal is not used at the new station to be allocated.

8.In case the designated old station is assigned as VPS station, also the new station to be allocated must be the VPS station. Otherwise, the station data changing cannot be activated.

CHAPTER 4 NDA-24298

Page 964

Issue 1