NEC NDA-24298 manual Asatn Assignment of Specific Attendant Number Data for NDM

ASATN : Assignment of Specific Attendant Number Data for NDM

ASATN: Assignment of Specific Attendant Number Data for NDM

1.General

This command assigns a specific Attendant Number that allows a station user to access the desired operator. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.The specific attendant number cannot be a station number or LDN already being used.

2.The maximum number of Attendant Consoles should be assigned by the ASYD command, SYS 1, INDEX 9.

3.The telephone number for specifying the attendant console must be assigned by the ALGNN command prior to this command.

3.Data Entry Instructions

		ATN
UGN	FPC	Enter the ATN that corresponds to the
Fixed to “1.”	Enter the PC of the node containing the specified	TK parameter for the attendant
	attendant console.	console assigned by the ATRK

			command.
USER		FUSION
	ACCESS CODE	POINT	TENANT	ATTENDANT
GROUP
	(ACC)	CODE	NUMBER	NUMBER
NUMBER
	MAXIMUM 16 DIGITS	(FPC)	(TN)	(ATN)
(UGN)
		1-253
	ACC

Enter the telephone number for special	TN
attendant number assigned by the
	Enter the tenant number that
ALGNN command.
	affects the special number.

CHAPTER 4 NDA-24298

Page 592

Issue 1