NEC NDA-24298 manual When setting outgoing restriction and toll restric, Is provided

ASYDN : Assignment of System Data in Network Data Memory

SYSTEM	SYSTEM	DATA	BIT
			CORRESPONDING
	DATA
DATA		(DATA)	DATA
	INDEX				SYSTEM DATA CONTENTS	(MDATA)
TYPE		00 – FF
	(INDEX)
			DATA
(SYS)		(Hex)		BIT
	0 -1535
			0/1
	0	00			Not used

~	~			~
3	00			Not used
			b0	Control of ORT all Busy Status
				0/1 = ROT/Wait for Off-hook Queue
		0	b1	Not used
			b2	Releasing Method for Station-to-Station Calling Service
				0	0	=	Calling Party release
				0	1	=	Called Party release
				1	0	=	First Party release
			b3	1	1	=	Both Party release
				Normally assign “First Party release”
				Temporary Class Conversion and OAI Free Location
				Memory
				0/1 = Not Required/Required
1				Note:			When setting outgoing restriction and toll restric-
4			b4				tion in the CCIS using the caller’s RSC transferred
							by a call origination from the preceding office, data
							value “1” is assigned. That destination restriction
							and number restriction cannot be done using RSC.
							This data is assigned “1” when the Authorization
							Code, Call Waiting-Terminating, or EROW service
							is provided.
				PAD Control of 16LC circuit card (for Station-to-Station
			b5	Calling only)
				0/1: Required/Not Required
				One Burst of Ringing On Call Forwarding (C.F.) phone when
				C.F. – All Calls service has been assigned (analog phones
			b6	only).
				0/1 = Not Required/Required
	0		b7	Not used

CHAPTER 4 NDA-24298

Page 906

Issue 1