NEC NDA-24298 manual Acsil Assignment of Connection Service Index Data for LDM

ACSIL : Assignment of Connection Service Index Data for LDM

ACSIL: Assignment of Connection Service Index Data for LDM

1.General

This command assigns the call termination for Direct-in Termination (Day and Night), Night Connection and Remote Access to System for the Local Node (LN) in Fusion network.

2.Precautions

1.The ACFR command assignment is also required to assign the trunk incoming call termination service feature.

2.When setting the CSI to “6” (Night Connection-Outside) or “7” (Direct-in Termination-Outside) using this command, the ADC must be set by the ASPD command.

3.Use the ACSAL command instead of this command if Direct-in Termination (Day mode only) is required.

4.When the “PFT control by the external key” is required, the following data assignments are needed:

(a)AUNT command, TYPE = 2 (PFT)

(b)AEKD command

(c)ANCD command

(d)ACSIL command, CSI = 4 (Direct-in Termination (Night Mode))

NDA-24298CHAPTER 4

Page 763

Issue 1