NEC NDA-24298 manual Att, When this data TC is 00 Hex, default data Minutes is set

ASYDN : Assignment of System Data in Network Data Memory

SYSTEM	SYSTEM	DATA	BIT
	DATA		CORRESPONDING
DATA		(DATA)
	INDEX		DATA						SYSTEM DATA CONTENTS	(MDATA)
TYPE		00 – FF
	(INDEX)
(SYS)		(Hex)	DATA 0/1	BIT
	0 – 1535
	29~32	00			Not used
			0	b0
			0	b1	Not used
			0	b2
				b3	Telephone Subject to Total Billing (when b6 = 1)
					b4		b3
					0	0		=	Telephone that called first.
					0	1		=	Telephone that called last.
				b4	1	0		=	First telephone after the call has been handled by
									ATT.
					1	1		=	Last telephone after the call has been handled by
	33								ATT.
					Billing for Transferred Incoming Call
				b5	01/ = Split/Total Billing
					Note:				Total Billing means “telephone that called last.”
1
					Billing for Transferred Outgoing Call
				b6	0/1 = Split/Total Billing
					Note:				Total Billing means “telephone that called last.”
				b7	Not used
	34~40	00			Not used
					OG Queuing Override - DDD Seizing Timer (for Fusion Ser-
					vice)
					Timer Counter (TC) is to be assigned a value from 01 Hex to
					7F Hex.
	41			b0~b6	Timer Value Setting is (TC) ⋅ 30 sec.
					Note:			When this data (TC) is 00 Hex, default data of 3
									minutes is set.
			0	b7	Not used

NDA-24298CHAPTER 4

Page 911

Issue 1