Operator's Manual | Third Edition • Second Printing |
|
|
|
|
OPERATING INSTRUCTIONS
Error Indicator display
If the LED diagnostic readout displays an error code, such as LL, push in and pull out the red Emergency Stop button to reset the system.
To Extend and Retract Platform (if equipped)
1Step on the platform extension release pedal.
2Grasp the platform guard rails carefully and push to extend the platform.
3Step on the platform extension release pedal and pull the guard rails to retract the platform.
Operation From Ground with Controller
Maintain safe distances between the operator, machine and fixed objects.
Be aware of the direction the machine will travel when using the controller.
Platform Overload
Flashing OL in the LED diagnostic readout indicates the platform is overloaded and no functions will operate. An alarm will sound.
1Push in the Red Emergency stop button to the off position.
2Remove the weight from the platform.
3Pull out the Red Emergency stop button to the on position.
Battery Level Indicator
FullLow
Use the LED diagnostic readout to determine the battery level.
Fall Protection
Personal fall protection equipment (PFPE) is not required when operating this machine. If PFPE is required by job site or employer rules, the following shall apply:
All PFPE must comply with applicable governmental regulations and must be inspected and used in accordance with the manufacturer’s instructions.
After Each Use
1Select a safe parking
2Lower the platform.
3Turn the key switch to the off position and remove the key to secure from unauthorized use.
4Chock the wheels.
5Charge the batteries.
24 | Part No. 97779 |
