Sanyo KHX1252 Display Section Refer to Setting indication, Unit indication, Timer No. indication

Remote Control Functions

3. Timer Remote Controller (RCS-TM80BG)

Display Section (Refer to the page 2-15)

1. SETTING indication

Appears when the timer program is being set.

2. UNIT indication

Indicates the unit No. of the indoor unit which is selected with the Unit Select button, or the unit in which an abnor- mality occurs.

3. TIMER No. indication

Appears when the time program is being set.

4.Timer program

: The indoor unit starts operation at the programmed time.

: The indoor unit stops operation at the programmed time.

5. Today’s day of the week Indicates today’s day of the week.

6.Program schedule indication

Appears under days that are scheduled for program op- eration.

7.Present time

Displays the present time on a 24-hour clock. Also, dis- plays settings in the various setting modes.

8.TIMER OFF indication

Displayed when the timer has been turned OFF.

9. ERROR indication

Displayed when a mistake is made during timer setting.

10. Outing indication ( Outing function)

Appears when the outing function is set.

11.Upper and lower limit indication of the outing func- tion

: Indicates the upper limit of the temperature

: Indicates the lower limit of the temperature

12.Operation Mode indication

Displays the selected operation mode. (AUTO /HEAT /DRY /COOL /FAN ).

13.Temperature indication Indicates the set temperature.

14.°F / °C temperature unit indication

15. Remote control sensor indication

Appears when the remote control sensor is used.

16. Centralized control indication

Appears when operated in centralized control. If the remote control operation is not permitted to the remote unit, when the Start/Stop button, Mode Select button or Temperature setting button is pressed, fl ashes and rejects the change.

17. Operation mode change control indication Displays when an operation mode is entered by the re- mote control unit, while another operation mode has been already selected. This indicates that the operation mode cannot be changed.

18. Disabled Feature indication

Displayed if the selected feature was disabled during installation.

20. Heating standby mode indication

appears when the fan of the indoor unit is stopped or in low fan speed.

21. / / / Fan mode select indication The selected fan mode is displayed.

22. SWING indication Appears while the fl ap swings.

23. Flap position indication Indicates the fl ap position.

24. Filter indication

Appears when fi lter needs cleaning. Clean the fi lter.

25. Inspection indication

Appears when the protective device is activated or when an abnormality occurs.

26.Ventilation indication

Appears when a fan available in the market is installed and is operating.

27. Oil indication

Appears when the engine oil needs to be changed. (Ap- pears when the gas heat pump air conditioner is used.)

28. Sleeping

Appears during the sleeping function.

29. CAUTION

Appears when the protective device is activated or when an abnormality occurs.

30.Unit No. indication

Indicates the unit No. of the selected indoor unit.

31. TEST indication

Appears while in test operation.

1

1

2

2

3

3

4

4

5

5

6

6

7

7

2-17

8

8