Sanyo AHX0952 Setting the Present Time, Once you enter in the setting mode Day and time fl ash

Remote Control Functions

3. Timer Remote Controller (RCS-TM80BG)

10. Setting the Present Time

1.Press and hold for more than 2 seconds to enter in the present

day and time setting mode.
Once you enter in the setting mode,				, “ ”(day) and “time” fl ash.
2. Set “ ” to today’s day of the week.
Press	*1	to move “	” (fl ashing on the display) in the order of :
Su Mo	Tu	.... Press	to move it in the order of : Su St
Fr ....
*1 While in time setting mode, the temperature setting buttons function as
	(changing day) button.				3,4	1,3,4	2
3. Press	to change the present “hour” in the range of 0 to 23*2.

Set the present hour and press .

The “hour” digits light up, and the “minute” digits start fl ashing.

*2 If the clock uses the 12 hours AM/PM setting, the hour is displayed in the range of AM 0 to 11/PM 0 to 11.

4. Press , to change the present “minute” in the range of 0 to 59.

Set the present minute and press . The day and time are set and fi nishes the setting mode.

Note

• The unit returns to the normal mode if is pressed or there is no operation made for 3 minutes during the setting. In this case, all the settings in progress will be lost.

•If the present time is invalid, “– – : – –” is displayed.

If the power failure for more than 1 hour occurs, check if the set data of day and time are valid.

2-21

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8